[dvd::rip] ERROR: Cannot open SCSI device

[Iñigo Alaña <inigoalana@xxxxxxxx>]

Dear all,

I can't seem to be able to burn an svcd image. To be
honest I'm pretty new. I think I managed to reach the
last step but can't get past it! The error I get when
clicking 'Burn selected file(s)' is:

Job 'Burn CD ' failed.

Executed command: rm -f
/home/inigo/dvdrip/dbb/miracle/avi/004/miracle_1.svcd.bin;
ln -s
/home/inigo/dvdrip/dbb/miracle/avi/004/miracle_1.svcd
/home/inigo/dvdrip/dbb/miracle/avi/004/miracle_1.svcd.bin
&& dr_exec cdrdao write --device 1,0,0 --speed 16
--driver generic-mmc --eject --overburn
/home/inigo/dvdrip/dbb/miracle/avi/004/miracle_1.svcd.cue
&& rm
/home/inigo/dvdrip/dbb/miracle/avi/004/miracle_1.svcd.bin
&& echo DVDRIP_SUCCESS

Last output was:


Cdrdao version 1.1.9 - (C) Andreas Mueller
<andreas@xxxxxxxx>
  SCSI interface library - (C) Joerg Schilling
  Paranoia DAE library - (C) Monty

Check http://cdrdao.sourceforge.net/drives.html#dt for
current driver tables.

ERROR: Cannot open SCSI device '1,0,0': 

Transport name:         sg
Transport descr.:       Generic transport independent SCSI
Transp. layer ind.:     
Target specifier:       bus,target,lun
Target example:         1,2,0
SCSI Bus scanning:      supported
Open via UNIX device:   not supported

Transport name:         pg
Transport descr.:       SCSI transport for ATAPI over
Parallel Port
Transp. layer ind.:     
Target specifier:       bus,target,lun
Target example:         1,2,0
SCSI Bus scanning:      supported
Open via UNIX device:   not supported

Transport name:         ATA
Transport descr.:       ATA Packet specific SCSI transport
Transp. layer ind.:     ATAPI:
Target specifier:       bus,target,lun
Target example:         ATAPI:1,2,0
SCSI Bus scanning:      supported
Open via UNIX device:   not supported

Transport name:         ATA
Transport descr.:       ATA Packet specific SCSI transport
using sg interface
Transp. layer ind.:     ATA:
Target specifier:       bus,target,lun
Target example:         1,2,0
SCSI Bus scanning:      supported
Open via UNIX device:   not supported
ERROR: Please use option '--device
[proto:]bus,id,lun', e.g. --device 0,6,0 or --device
ATAPI:0,0,0
ERROR: Cannot setup device 1,0,0.
Supported SCSI transports for this platform:



After a lot of research I still don't know what's
wrong. 'cdrdao scanbus' and other commands always give
the same output:

...
Using libscg version 'schily-0.8'

ATA:1,0,0            HL-DT-ST, RW/DVD GCC-4241N, 0202
...

So I added a line to the cdrdao drivers file:

W|HL-DT-ST|RW/DVD
GCC-4241N|generic-mmc|OPT_MMC_CD_TEXT

I also tried to run it as root but to no avail. My
Preferences Check results are:

DVD device: /dev/cdrom writable : Ok
DVD mount point: /media/cdrecorder exists : Ok
Default data base directory: /home/inigo/dvdrip/dbb
writable : Ok
Default directory for .rip project files:
/home/inigo/dvdrip/rippf writable : Ok
OGG file extension: not tested : Ok

DVD player command: /usr/bin/mplayer executable : Ok
File player command: /usr/bin/mplayer executable : Ok
STDIN player command: /usr/bin/xine executable : Ok
rar command (for vobsub compression): /usr/bin/rar
executable : Ok

Writer device file: /dev/cdwriter writable : Ok
cdrecord device (n,n,n or filename): 1,0,0 has format
n,n,n : Ok
cdrecord command: /usr/lib/xcdroast-0.98/bin/xcdrwrap
executable : Ok
cdrdao command: /usr/bin/cdrdao executable : Ok
mkisofs command: /usr/bin/mkisofs executable : Ok
vcdimager command: /usr/bin/vcdimager executable : Ok
Writing speed: 16 is numeric : Ok
Estimate ISO size: not tested : Ok
CD-RW blank method: not tested : Ok

cdrdao driver: not tested : Ok
Overburning: not tested : Ok
Eject disc after write: not tested : Ok
Buffersize: is empty : Ok

Start cluster control daemon locally: not tested : Ok
Hostname of server with daemon: not tested : Ok
TCP port number of daemon: 28646 is numeric : Ok

Default video codec: not tested : Ok
Default container format: not tested : Ok
Default BPP value: not tested : Ok
Startup window width: not tested : Ok
Startup window height: not tested : Ok
Preferred language: not tested : Ok
Show tooltips: not tested : Ok
Workaround transcode NPTL bugs: not tested : Ok


I selected 'generic-mmc' as cdrdao driver.

Does anybody know what I'm doing wrong?

Thanks
Iñigo



                
______________________________________________ 
Renovamos el Correo Yahoo! 
Nuevos servicios, más seguridad 
http://correo.yahoo.es