On Sat, 2005-06-18 at 19:20 +1200, jonathan pickard wrote:
> Hi
> i have just completed a fresh install on FC4. i can rip dvds fine but i
> cannot encode them. I keep getting a seg fault no matter what codex I
> use (xvid, ffmpeg etc)
>
>
> [jdip@kyle ~]$ transcode -H 10 -a 0 -x vob,null
> -i /srv/dvdrip/batman/vob/001 -w 1200,50 -b 128,0,0 -s 2 --a52_drc_off
> -f 25 -Y 6,0,250,0 -B 12,10,8 -R 1 -y xvid4,null -o /dev/null
> --print_status 20
> transcode v1.0.0beta3 (C) 2001-2003 Thomas Oestreich, 2003-2004 T.
> Bitterberg
> libdvdread: Using libdvdcss version 1.2.8 for DVD access
> libdvdread: Couldn't find device name.
> libdvdread: Can't open file VIDEO_TS.IFO.
> [transcode] (probe) suggested AV correction -D -1 (-40 ms) | AV -62 ms |
> -22 ms
> [transcode] auto-probing source /srv/dvdrip/batman/vob/001 (ok)
> [transcode] V: import format | MPEG-2 (V=vob|A=null)
> [transcode] V: AV demux/sync | (1) sync AV at initial MPEG sequence
> [transcode] V: import frame | 352x576 0.61:1 encoded @ 4:3
> [transcode] V: new aspect ratio | 272x480 0.57:1 (-B)
> [transcode] V: clip frame (->) | 272x224
> [transcode] V: bits/pixel | 0.788
> [transcode] V: decoding fps,frc | 25.000,0
> [transcode] V: multi-pass | (mode=1) writing data (pass 1) to
> divx4.log
> [transcode] V: Y'CbCr | YV12/I420
> [transcode] A: import format | 0x2001 AC3/A52 [48000,16,2] 224
> kbps
> [transcode] A: export | disabled
> [transcode] V: encoding fps,frc | 25.000,3
> [transcode] A: bytes per frame | 7680 (7680.000000)
> [transcode] A: adjustment | 0@1000
> [transcode] A: rescale stream | 2.000
> [transcode] A: AV shift | -62 ms [ -1 (A) | -22 ms ]
> [transcode] V: IA32/AMD64 accel | sse3 (sse3 sse2 sse mmxext mmx asm C)
> tc_memcpy: using sse for memcpy
> [transcode] V: video buffer | 10 @ 352x576
> [import_null.so] v0.2.0 (2002-01-19) (video) null | (audio) null
> [import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio)
> MPEG/AC3/PCM | (subtitle)
> [export_null.so] v0.1.2 (2001-08-17) (video) null | (audio) null
> [export_xvid4.so] v0.0.5 (2003-12-05) (video) XviD 1.0.x series (aka API
> 4.0) | (audio) MPEG/AC3/PCM
> [import_vob.so] tccat -i "/srv/dvdrip/batman/vob/001" -t vob -d 0 -S 0 |
> tcdemux -s 0x80 -x mpeg2 -S 0 -M 1 -d 0 | tcextract -t vob -a 0 -x mpeg2
> -d 0 | tcdecode -x mpeg2 -d 0 -y yv12
> [export_xvid4.so] Neither './xvid4.cfg' nor '~/.transcode/xvid4.cfg'
> [export_xvid4.so] found. Default settings will be used instead.
> tc_memcpy: using sse for memcpy
> [decode_mpeg2.c] libmpeg2 0.4.0b loop decoder
> [decode_mpeg2.c] libmpeg2 acceleration: mmxext
> Segmentation fault
>
> [jdip@kyle ~]$ rpm -q transcode
> transcode-1.0.0-0.1.beta3.2.fc4
>
> [jdip@kyle ~]$ rpm -q perl-Video-DVDRip
> perl-Video-DVDRip-0.52.5-1.2.fc4
>
>
> Any pointers on how to sort this out (including RTFM) would be great.
>
hmmmm
I have found the problem:
I downgraded the transcode rpm to
[root@kyle 4]# rpm -q transcode
transcode-0.6.14-1.1.fc3.rf
This one is from the freshrpms repository
transcode-1.0.0-0.1.beta3.2.fc4
It has nothiong to do with subtitles but the solution is the same as a
post in the archives. I can encode again.
|
DOCUMENTATION
TABLE OF CONTENTS