Hello,
my ffmpeg with mpeg4 codec failed on the second pass. What's wrong there?
Thanks,
Florian
Job 'Video Transkodieren - Titel #1, Lauf 2' failed with error message:
Command exits with failure code:
Command: mkdir -m 0775 -p '/media/disk/temp/Land_of_the_dead/tmp' &&
cd /media/disk/temp/Land_of_the_dead/tmp &&
mkdir -p /media/disk/temp/Land_of_the_dead/avi/001 && execflow -n 19
transcode -H 10 -a 1 -x vob -i /media/disk/temp/Land_of_the_dead/vob/001/ -w
1668,50 -F mpeg4 -b 128,0,2 -s 1.018 --a52_drc_off -J
smartyuv=threshold=10:Blend=1:diffmode=2:highq=1 -f 25.000 -Y 42,0,38,0 -B
28,12,8 -R 2 -y
ffmpeg -o /media/disk/temp/Land_of_the_dead/avi/001/Land_of_the_dead-001.avi
--print_status
25 && echo EXECFLOW_OK
Output: transcode v1.0.2 (C) 2001-2003 Thomas Oestreich, 2003-2004 T.
Bitterberg
tc_memcpy: using sse for memcpy
[import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio) MPEG/AC3/PCM |
(subtitle)
[export_ffmpeg.so] v0.3.13 (2004-08-03) (video) Lavc51.9.0 | (audio)
MPEG/AC3/PCM
[export_ffmpeg.so] Using FFMPEG codec 'mpeg4' (FourCC 'DIVX', MPEG4 compliant
video).
[export_ffmpeg.so]: WARNING: Interlacing parameters unknown,
use --encode_fields
[export_ffmpeg.so]: INFO: No profile selected
[export_ffmpeg.so] Neither './ffmpeg.cfg' nor '~/.transcode/ffmpeg.cfg'
[export_ffmpeg.so] found. Default settings will be used instead.
[export_ffmpeg.so]: INFO: Starting 1 thread(s)
[export_ffmpeg.so]: INFO: Set display aspect ratio to input
tc_memcpy: using sse for memcpy
tc_memcpy: using sse for memcpy
[decode_mpeg2.c] libmpeg2 0.4.0b loop decoder
[decode_mpeg2.c] libmpeg2 acceleration: mmxext
[mpeg4 @ 0xb52caba4]removing common factors from framerate
[mpeg4 @ 0xb52caba4]Error: 2pass curve failed to converge
[export_ffmpeg.so] could not open FFMPEG codec
[transcode] warning : (encoder.c) video export module error: init failed
[transcode] (probe) suggested AV correction -D 0 (0 ms) | AV 0 ms | 0 ms
[transcode] auto-probing source /media/disk/temp/Land_of_the_dead/vob/001/
(ok)
[transcode] V: import format | MPEG-2 (V=vob|A=vob)
[transcode] V: AV demux/sync | (1) sync AV at initial MPEG sequence
[transcode] V: import frame | 720x576 1.25:1 encoded @ 16:9
[transcode] V: new aspect ratio | 624x352 1.77:1 (-B)
[transcode] V: clip frame (->) | 624x272
[transcode] V: bits/pixel | 0.393
[transcode] V: decoding fps,frc | 25.000,0
[transcode] V: multi-pass | (mode=2) reading data (pass2) from divx4.log
[transcode] V: Y'CbCr | YV12/I420
[transcode] A: import format | 0x2000 AC3 [48000,16,2] 384 kbps
[transcode] A: export format | 0x55 MPEG layer-3 [48000,16,2] 128 kbps
[transcode] V: encoding fps,frc | 25.000,3
[transcode] A: bytes per frame | 7680 (7680.000000)
[transcode] A: adjustment | 0@1000
[transcode] A: rescale stream | 1.018
[transcode] V: IA32/AMD64 accel | sse2 (sse2 sse mmxext mmx asm C)
[transcode] V: video buffer | 10 @ 720x576
[filter_smartyuv.so] options=threshold=10:Blend=1:diffmode=2:highq=1
[filter_smartyuv.so] (MMX) 0.1.4 (2003-10-13) Motion-adaptive deinterlacing
[import_vob.so] tccat -i "/media/disk/temp/Land_of_the_dead/vob/001/" -t
vob -d 0 -S 0 | tcdemux -a 1 -x ac3 -S 0 -M 1 -d 0 | tcextract -t vob -a 1 -x
ac3 -d 0 | tcdecode -x ac3 -d 0 -s 1.000000,1.000000,1.000000 -A 1
[import_vob.so] tccat -i "/media/disk/temp/Land_of_the_dead/vob/001/" -t
vob -d 0 -S 0 | tcdemux -s 0x81 -x mpeg2 -S 0 -M 1 -d 0 | tcextract -t vob -a
0 -x mpeg2 -d 0 | tcdecode -x mpeg2 -d 0 -y yv12
[transcode] critical: failed to init encoder
--------------------------------------------------------------------------------
|
DOCUMENTATION
TABLE OF CONTENTS