Re: [dvd::rip] Transcode doens't work with dvdrip 0.98.4

[Fabio Russo <f.russo@xxxxxxxxxxxxxxxxxx>]

Il giorno lun, 09/04/2007 alle 00.05 +0100, Marek Matulka ha scritto:
> Hi all && Happy Easter :-)
> 
> It's being lazy day for me, so I decided to rip one dvd and... it's
> first time I am ripping after upgrading to 0.98.4. basically -
> trasncode doesn't want to work :-)
> 
> There is an error message:
> 
> Job 'Transcode video - title #5, pass 2' failed with error message:
> Command exits with failure code:
> Command: mkdir -m 0775 -p
> '/home/marek/Programs/dvdrip-data/martwy-farciarz/tmp' && cd
> /home/marek/Programs/dvdrip-data/martwy-farciarz/tmp && mkdir -p
> /home/marek/Programs/dvdrip-data/martwy-farciarz/avi/005 && execflow
> -n 19 transcode -H 10 -a 0 -x vob -i
> \/home\/marek\/Programs\/dvdrip\-data\/martwy\-farciarz\/vob\/005\/ -w
> 1008,50 -F mpeg4 -b 96,0,2 --use_rgb -k  -f 25.000 -Y 48,11,52,11 -Z
> 662x372 -R 2 -y ffmpeg -o
> /home/marek/Programs/dvdrip-data/martwy-farciarz/avi/005/martwy-farciarz-005.avi
> --print_status 25 && echo EXECFLOW_OK
> 
> Output: transcode v1.0.2 (C) 2001-2003 Thomas Oestreich, 2003-2004 T. 
> Bitterberg
> [transcode] (probe) suggested AV correction -D 1 (40 ms) | AV 79 ms | 39 ms
> [transcode] auto-probing source
> /home/marek/Programs/dvdrip-data/martwy-farciarz/vob/005/ (ok)
> [transcode] V: import format    | MPEG-2  (V=vob|A=vob)
> [transcode] V: AV demux/sync    | (1) sync AV at initial MPEG sequence
> [transcode] V: import frame     | 720x576  1.25:1  encoded @ 16:9
> [transcode] V: zoom             | 662x372  1.78:1 (Lanczos3)
> [transcode] V: clip frame (->)  | 640x272
> [transcode] V: rgb2bgr          | yes
> [transcode] V: bits/pixel       | 0.232
> [transcode] V: decoding fps,frc | 25.000,0
> [transcode] V: multi-pass       | (mode=2) reading data (pass2) from divx4.log
> [transcode] A: import format    | 0x2001  AC3/A52      [48000,16,2]  192 kbps
> [transcode] A: export format    | 0x55    MPEG layer-3 [48000,16,2]   96 kbps
> [transcode] V: encoding fps,frc | 25.000,3
> [transcode] A: bytes per frame  | 7680 (7680.000000)
> [transcode] A: adjustment       | 0@1000
> [transcode] V: IA32/AMD64 accel | sse2 (sse2 sse mmxext mmx asm
> tc_memcpy: using sse for memcpy
> [import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio)
> MPEG/AC3/PCM | (subtitle)
> [export_ffmpeg.so] v0.3.13 (2004-08-03) (video) Lavc51.14.0 | (audio)
> MPEG/AC3/PCM
> [export_ffmpeg.so] Using FFMPEG codec 'mpeg4' (FourCC 'DIVX', MPEG4
> compliant video).
> [export_ffmpeg.so]: WARNING: Interlacing parameters unknown, use 
> --encode_fields
> [export_ffmpeg.so]: INFO: No profile selected
> [export_ffmpeg.so] Neither './ffmpeg.cfg' nor '~/.transcode/ffmpeg.cfg'
> [export_ffmpeg.so] found. Default settings will be used instead.
> [export_ffmpeg.so]: INFO: Starting 1 thread(s)
> [export_ffmpeg.so]: INFO: Set display aspect ratio to input
> [export_ffmpeg.so] Could not read the complete 2pass log file "divx4.log".
> [transcode] warning : (encoder.c) video export module error: init failed
> C)
> [transcode] V: video buffer     | 10 @ 720x576
> [import_vob.so] tccat -i
> "/home/marek/Programs/dvdrip-data/martwy-farciarz/vob/005/" -t vob -d
> 0 -S 0 | tcdemux -a 0 -x ac3 -S 0 -M 1 -d 0 | tcextract -t vob -a 0 -x
> ac3 -d 0 | tcdecode -x a52 -d 0 -A 0
> [import_vob.so] tccat -i
> "/home/marek/Programs/dvdrip-data/martwy-farciarz/vob/005/" -t vob -d
> 0 -S 0 | tcdemux -s 0x80 -x mpeg2 -S 0 -M 1 -d 0 | tcextract -t vob -a
> 0 -x mpeg2 -d 0 | tcdecode -x mpeg2 -d 0
> [transcode] critical: failed to init encoder
> tc_memcpy: using sse for memcpy
> tc_memcpy: using sse for memcpy
> [decode_mpeg2.c] libmpeg2 0.4.0b loop decoder
> [decode_mpeg2.c] libmpeg2 acceleration: mmxext
> failed to write Y plane of frame(demuxer.c) write program stream
> packet: Broken pipe
> No accelerated IMDCT transform found
> 
> --------------------------------------------------------------------------------
> 
> any ideas? :-)

Hi and happy Easter to you too ;)
Now, the ffmpeg encoder says it can't found the divx4.log file, that's
needed for second pass encoding.
Just out of curiosity: are you trying to encode with the box "Reuse log"
checked (Transcode tab, Video options), maybe without doing the first
pass?
-- 
Kind regards,
f.russo@xxxxxxxxxxxxxxxxxx

signature.asc
Description: Questa =?ISO-8859-1?Q?=E8?= una parte del messaggio firmata digitalmente