[dvd::rip] Cluster Problems

Hello,

I'm new to DVD::RIP and I'm having trouble getting clustering working.
I basically want to use it to batch transcode on a local node.

Now, the node set-up seems fine. It works and test settings all say
"OK". However, when I try to run a job, it doesn't work. I've seen two
errors but the one I'm getting just now is:

Sat Jun 30 10:32:04 2007 [1] Project file saved to
'/home/flemingg/.dvdrip-master/projects/00000009-24s4d2.rip'
Sat Jun 30 10:32:04 2007 [1] Start job 'Project '24s4d2' - title #1'
Sat Jun 30 10:32:04 2007 [1] Start job 'All running cluster projects'
Sat Jun 30 10:32:04 2007 [1] Start job 'Move PSU #0 file to final destination'
Sat Jun 30 10:32:04 2007 [1] Executing command: umask 0002; execflow
mv /media/sdc5/scratch/24s4d2/avi/001/audio-video-psu/24s4d2-001-av-psu-00.avi
/media/sdc5/scratch/24s4d2/avi/001/24s4d2-001.avi && echo EXECFLOW_OK
Sat Jun 30 10:32:04 2007 [1] Job 'All running cluster projects' finished
Sat Jun 30 10:32:04 2007 [1] Project file saved to
'/home/flemingg/.dvdrip-master/projects/00000009-24s4d2.rip'
Sat Jun 30 10:32:04 2007 [1] Job 'Project '24s4d2' - title #1' finished
Sat Jun 30 10:32:04 2007 [1] Job 'Move PSU #0 file to final
destination' finished
Sat Jun 30 10:32:04 2007 [1] Job 'Move PSU #0 file to final
destination' exited with error: Command exits with failure code:
Command: umask 0002; execflow mv
/media/sdc5/scratch/24s4d2/avi/001/audio-video-psu/24s4d2-001-av-psu-00.avi
/media/sdc5/scratch/24s4d2/avi/001/24s4d2-001.avi && echo EXECFLOW_OK

Output: mv: cannot stat
`/media/sdc5/scratch/24s4d2/avi/001/audio-video-psu/24s4d2-001-av-psu-00.avi':
No such file or directory

Any ideas?

Regards,
G.


--
It's not that one-dimensional, it's not the only thought